We have recently talked about entertainment in many parts of the lighting design, for entertainment, of lighting design is different in different regions of the simple today we see often ignore the lighting design aspects of the knowledge in the meeting room. The stage lighting equipment
Take a look first at the lighting design
Conference room lighting design is usually the main is to consider its light illumination, general lighting illumination is a basic and necessary conditions of video conference room, in the lighting design when we don't usually use natural light, we know that want to large entertainment at the meeting at the time of training, and personnel are very often use some more projection equipment, therefore the conference room doors and Windows with brunet curtain shade. Light had no adverse effect on the human eye vision. General conference room lighting design of light source color temperature should be adopted for the 3200 k "trichromatic lamp (R, G, B), cold light source, to the three primary colors light lamps and lanterns should be dimming control can move light table.
Lighting design is used in order to meeting the venue of the camera, camera, and image acquisition and transmission. If the general lighting, will find that the image after image acquisition white, not natural, is not clear wait for a phenomenon.
Below we specific see the lighting design
Illumination: chairman of the conference room of the photography area of not less than 800 lx average illuminance; Both general OuDeZeng illumination not less than 500 lx. Monitor or screen back projector illumination: around 50 lux ~ 80 lux, at the time of the lighting design must pay attention to these otherwise will affect the viewing effect.
Below we simple look at the three primary colors in the design of a light lambency lamp use
1. Before use, please check to see if there is caused by shipping damage or tighten the screw loose.
(2) the film and television tricolor soft light, the use of 220 v / 36 w trichromatic lamp as light source.
(3) the installation using the tube when the glass tube head first into protection bayonet, put the lamp holder inserted into the lamp holder, please do not use hand touch light glass part directly.
(4) we customs clearance damper to achieve the best effect.
5. We use the lamps and lanterns must be installed in the ventilation effect is good and the temperature is not higher than 45 ℃ environment.
6. Lamps and lanterns must want to have a good grounding in accordance with safety regulations.
Conference room lighting design and places of entertainment in the lighting design is also more important, the general of some of the large entertainment activities are held to be in a place like this it is important to note that the lighting design, the design must pay attention to the above we told by that time.