POWER SUPPLIES

100-240V 50/60Hz

INPUT POWER

450VA

LAMP SOURCE

19 Osram Ostar RGBW LEDs
LED Nominal Wattage: 15W
LED Average Life: 50,000 h

OPTICS

4°-60° Electronic Zoom Range

EFFECTS SECTION

Three operating modes: wash, beam, FX (Kaleido effects)
Rotating Front Lens
Digital Wash-Beam Framing effect
Beam edge softening control (in Wash mode)
Pixel Patterning Macros with enhanced control
0-100% linear electronic dimmer
Adjustable speed stop/strobe effect, with instantaneous blackout
Dedicated channel for color temperature setting
White CT Emulation 2500-8000K
RGBW auto-tuning to lamp CT Emulation
Tungsten Lamp Emulation
Slow Strobe: 1 flash/sec
Fast Strobe: 25 flash/sec

CONTROL AND PROGRAMMING

Control channels: 21CH, 35CH, 78CH, 92CH and 97CH
Protocol signal: USITT DMX 512
Art-Net / RDM
Display: Graphic LCD backlit b/w Display 
Pan/Tilt Resolution: 16 bit
Dimmer Resolution: 16 bit
Movement control: vectorial
DMX signal connection: 3 pin XLR input and output
Software upload through DMX input

BODY

Aluminium structure with die-cast plastic cover
Two side handles for transportation
PAN lock for transport and maintenance

MOVING BODY

Movement by means of two stepper motors, controlled by microprocessor 
Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit
Travel:
- PAN = 540°
- TILT = 210°

ELECTRONICS

Long-life auto-charging buffer battery
Preset color and graphic effect macros
Function reset controllable from a central control unit
Menu-driven internal self-test function
Display: LCD display with Touch Screen Panel
Electronic check-up of every single parameter with error alarm
DMX level monitoring on each channel
Automatic internal data transmission error diagnostics
Firmware upgrade even when the unit is not connected to the power supply
Firmware transfer from one light to another

SAFETY DEVICES

Automatic power safety derating in case of overheat of the LED board
Forced ventilation

WORKING POSITION

Working in any position
Hanging system: with fast-lock omega clamps (1/4 turn) on the base

WEIGHT

15 Kg (33.1 lbs)